Depth-micrometers (depth gauges) have applications whenever the depths of holes, slots or steps need to be measured.
Depth micrometers came in a variety of types; the single rod type, the interchangeable rod type (most widely used) and the sectioned rod type.
They consist of a micrometer head (identical to that used in conventional outside micrometers), a spindle and a base. The base is lapped to a high degree of flatness (1 to 2 microns).
With interchangeable rod types of depth micrometers (depth gauges), it is essential that the zero be checked each type a different rod is fitted.
Interchangeable rods should only be adjusted by those thoroughly familiar with the practice.
Tolerances and requirements for depth micrometers are specified in Australian Standard AS 2101.
Metrology equipment of any sort should not be subjected to impact such as being dropped as they are easily damaged or become inaccurate.
METROLOGY EQUIPMENT APPLICATIONS
There are a wide range of different types of metrology equipment each with a host of applications. Although such equipment is in most cases robust, users need to ensure their equipment remain in good working order and accurate.
METROLOGY EQUIPMENT CALIBRATION PROCEDURES
Metrology equipment items are first cleaned and then checked to ensure that they are not damaged. They are then examined for accuracy over the range of use in accordance with the specific Standard or to specific manufacturer’s requirements if stated.
CMS uses calibrated state-of-the-art master equipment to verify that metrology equipment is measuring within requirements and adjusted if required.
Metrology equipment items are returned to clients with a comprehensive calibration report within three working days of receipt.
MAKES OF METROLOGY EQUIPMENT WE CALIBRATE
At CMS we calibrate a wide range of metrology equipment
Makes include: – Mitutoyo, Moore & Wright, Starrett, MeasureMax and others.
RELATED EQUIPMENT CALIBRATION SERVICES YOU MAY WANT
You may find the following equipment calibration services helpful:
Calibration Management Services operates in accordance with ISO/IEC 17025:2005 “General Requirements for the Competence of Testing and Calibration Laboratories.”
Please do not hesitate to call Calibration Management Services on 08 8381 1322 if you have any questions related to equipment calibration – our friendly team will be pleased to assist you.