Micrometers External

 

External Micrometer Calibration Services – CMS Adelaide

 

 

Our fast and efficient Micrometer-External Calibration Service can be used to accurately Calibrate most types of gauges.

 

Our Micrometer-External Calibration Services

External micrometers are available in a wide range of sizes and makes. Basic models have graduations on the rotating thimble and the sleeve. Digital micrometers provide direct readings.

Although the anvils are usually made of tungsten carbide care must always be taken to ensure they remain clean and undamaged. The ratchet is used to ensure a constant force is applied to the object being measured. Zero adjustments can be made where necessary by rotating the sleeve with a special spanner made for this purpose. When micrometers are not in use the jaws should be left slightly open because if they are left in the closed position this could distort the frame of the micrometer particularly in hot conditions.

Tolerances and requirements for external micrometers are specified in Australian Standard AS 2101.

Metrology equipment should not be subjected to impact such as being dropped as they are easily damaged or become inaccurate.

 

Metrology Equipment Applications

There are a wide range of different types of metrology equipment with a host of applications.  Although such equipment is in most cases robust, users need to ensure their equipment remain in good working order and accurate.

 

Metrology Equipment Calibration Procedures

Metrology equipment items are first cleaned and then checked to ensure that they are not damaged. They are then examined for accuracy over the range of use in accordance with the specific Standard or to specific manufacturer’s requirements if stated.

CMS uses calibrated state-of-the-art master equipment to verify that metrology equipment is measuring within requirements and adjusted if required.

Metrology equipment items are returned to clients with a comprehensive calibration report within three working days of receipt.

 

Makes of Metrology Equipment We Calibrate

At CMS we calibrate a wide range of metrology equipment

Makes include: - Mitutoyo, Moore & Wright, Starrett, MeasureMax and others.

 

Related Equipment Calibration Services You May Want

You may find the following equipment calibration services helpful:

internal micrometer

depth micrometer

 

Calibration Management Services operates in accordance with ISO/IEC 17025:2005 “General Requirements for the Competence of Testing and Calibration Laboratories.”

 

Please do not hesitate to call Calibration Management Services on 08 8381 1322 if you have any questions related to equipment calibration – our friendly team will be pleased to assist you.