Engineers Squares

 

Engineers Squares Calibration Services – CMS Adelaide

 

Our fast and efficient Engineers Squares-Calibration Service can be used to accurately calibrate most types of gauges.

 

Our Engineers Squares-Calibration Services

Engineers squares (machinists squares or try squares) are used to verify squareness and consist of a steel blade inserted into a heavier body at an angle of 90º. The body and blade are aligned against the object being checked. Usually  a small notch is added to the inside corner of the square to prevent small particles gathering there and affecting the square's reading.

The Standard BS 929 is the specification that defines the requirements of Engineers Squares that come in three grades of accuracy, AA, A and B in sizes from 50mm x 40mm up to 1000mm x 1000mm. The Standard requires that the angular variations in squareness across the length of the blade to be no greater than +/- (2 + 8L) microns where L is the length of the blade in meters.

 

Metrology equipment of any type should not be subjected to impact such as being dropped as they are easily damaged or become inaccurate.

 

Metrology Equipment Applications

There are a wide range of different types of metrology equipment with a host of applications.  Although such equipment is in most cases robust, users need to ensure their equipment remain in good working order and accurate.

 

Metrology Equipment Calibration Procedures

Metrology equipment items are first cleaned and then checked to ensure that they are not damaged. They are then examined for accuracy over the range of use in accordance with the specific Standard or to specific manufacturer’s requirements if stated.

CMS uses calibrated state-of-the-art master equipment to verify that metrology equipment is measuring within requirements and adjusted if required.

Metrology equipment items are returned to clients with a comprehensive calibration report within three working days of receipt.

 

Makes of Metrology Equipment We Calibrate

At CMS we calibrate a wide range of metrology equipment

Makes include: - Mitutoyo, Moore & Wright, Starrett, MeasureMax and others.

 

Related Equipment Calibration Services You May Want

You may find the following equipment calibration services helpful:

external micrometer

depth micrometer

 

Calibration Management Services operates in accordance with ISO/IEC 17025:2005 “General Requirements for the Competence of Testing and Calibration Laboratories.”

 

Please do not hesitate to call Calibration Management Services at 08 8381 1322 if you have any questions related to equipment calibration – our friendly team will be pleased to assist you.